New automated process makes nanofiber fabrication assessment 30% more accurate

Imbued with special electric, mechanical and other physical properties due to their tiny size, nanofibers are considered leading-edge technology in biomedical engineering, clean energy and water quality control, among others. Now, researchers in Italy and UK have developed an automatic process to assess nanofiber fabrication quality, producing 30% more accurate results than currently used techniques.

Details were published on January 2021 in IEEE/CAA Journal of Automatica Sinica, a joint publication of the IEEE and the Chinese Association of Automation.

“In recent years, nanostructured materials have gained continuously growing interest both in scientific and industrial contexts, because of their research appeal and versatile applications,” said paper author Cosimo Ieracitano, research fellow in the Neurolab Group, Department of Civil Engineering, Energy, Environment and Materials, University Mediterranea of Reggio Calabria. “Nanofiber applications success requires special care be paid to the quality of nanomaterial and the generation process.”

Nanofibers are produced by applying a high voltage to a syringe containing a polymer solution and a spinning collector. The solution, powered by the electric charge, jets out onto the collector and results in nanofibers. For a product that requires uniformity – for example, a nanofiber intended as scaffolding to grow cells will result in uneven growth if it contains a lump or a hole, or it might not be able to grow any if it has a film on it – the current production process is quite messy.

To prevent anomalies, technicians monitor the fiber production using a scanning electron microscope that can precisely determine the topography of the fibers, as well as their composition. They then visually inspected the images. According to Ieracitano, it is a time-consuming process that depends on humans, who can become fatigued and make mistakes.

“In the production chain of nanomaterials, a crucial step is to practically implement automation in the defect-identification process to reduce the number of laboratory experiments and the burden of the experimentation phase,” Ieracitano said.

The research team designed a two-part automatic process to homogenous nanofibers. An autoencoder, a type of machine-learning software, chops the scanning electron microscope images into smaller pieces and translates them into code. That code is rendered into more basic versions of the original images, reducing computing power but still highlighting any anomalies. Another machine-learning processor assess the image, looking for any structural flaws. If it finds one, it dismisses the nanofiber as defective.

“Notably, the proposed system outperforms other standard machine-learning techniques, as well as other recent state-of-the art methods, reporting an accuracy of up to 92.5%,” Ieracitano said. Currently used techniques are typically 64 to 66% accurate.

###

C. Ieracitano, A. Paviglianiti, M. Campolo, A. Hussain, E. Pasero, and F. C. Morabito, “A novel automatic classification system based on hybrid unsupervised and supervised machine learning for electrospun nanofibers,” IEEE/CAA J. Autom. Sinica, vol. 8, no. 1, pp. 64-76, Jan. 2021.

Fulltext of the paper is available:

http://www.ieee-jas.net/en/article/doi/10.1109/JAS.2020.1003387

https://ieeexplore.ieee.org/document/9205684

IEEE/CAA Journal of Automatica Sinica aims to publish high-quality, high-interest, far-reaching research achievements globally, and provide an international forum for the presentation of original ideas and recent results related to all aspects of automation.

The first Impact Factor of IEEE/CAA Journal of Automatica Sinica is 5.129, ranking among Top 17% (11/63, SCI Q1) in the category of Automation & Control Systems, according to the latest Journal Citation Reports released by Clarivate Analytics in 2020. In addition, its latest CiteScore is 8.3, and has entered Q1 in all three categories it belongs to (Information System, Control and Systems Engineering, Artificial Intelligence) since 2018.

Why publish with us: Fast and high quality peer review; Simple and effective online submission system; Widest possible global dissemination of your research; Indexed in SCIE, EI, IEEE, Scopus, Inspec. JAS papers can be found at http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=6570654 or http://www.ieee-jas.net

Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.

Products You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *